安徽主保佳新型涂料有限公司,咨询电话:0551-66396238
公司新闻

浅谈水性多彩涂料的施工工艺水泥粗糙面注意事项

日期:2016年7月26日 浏览[989]

1.基面处理:粗糙面最容易也最难处理的是粉砂面,一般粗糙面用手摸起来砂子就会掉满地或用铁物轻轻刮就会将粗砂细粉刮起这是最难处理的,一般使用粗糙面都是用木镘刀抹平,而此木镘刀就是最会发生前面所提的问题,因此在平时最好用铁或钢镘刀抹平,使表面不会发生此现象,而抹平的时间也得注意,刮平后应立即使用铁(钢)镘刀修饰,而不能等表面干燥后再抹平。


Surface treatment: silty sand surface is rough surface is the most easily is also the most difficult to deal with, generally rough surface touch the sand will fall all over the floor or with iron gently scraping will the coarse fine powder blowing this is the most difficult to deal with, generally uses the rough surface is wood trowel troweling, and the wood trowel is most likely to problems mentioned above, so in peacetime, it is best to use iron or steel trowel troweling, so that the surface of this phenomenon does not occur, and erase the time also must pay attention to the, after scraping flat should immediately use iron (steel) trowel modified, but not surface after drying and smooth.


2.基面调整:清除污垢,水泥屑粉化处,铲除干净,重新将表面予以抹平或补平。


2 base adjustment: remove dirt, cement powder at the surface, to be wiped out, smooth or flat.

 

安徽真石漆官方网站:http://www.ahzbj.com

 

 

最新内容:



上一篇: 水性多彩涂料的施工工艺之水泥光面注意事项
下一篇: 真石漆的施工条件和产生色差大的原因

安徽新型涂料有限公司 合肥墙绘公司 合肥网络布线版权所有 Copyright  2010 All Right Reserve 免责声明 皖ICP备11002092号 合肥网站制作:合肥网络公司

安徽省合肥市双凤工业园 网址:http://www.ahzbj.com/  网站地图