天然真石漆的一般施工工艺之主要施工设备及要求

1) the nozzle diameter: 4, 5, 6 and 8 mm, and according to the requirements of a model selection of different nozzle, aperture is small, spraying effect is smooth and uniform, large caliber, spend a little more, concave convex sense is stronger.

2) 空气压缩机: 功率5W 以上,压力为015～110MPa ,气量充足,至少带三根气管,能满足三人以上同时施工,能自动控制压力;

2) air compressor: the power 5W above, the pressure is 015 ~ 110MPa, the volume is enough, at least with three air pipe, can satisfy three people at the same time construction, can automatically control the pressure;

3) 真石漆喷枪:分单枪、双枪、三枪等,根据不同的花色选择单色用单枪,双色、多色用双枪、三枪,以便适应不同施工工艺,喷出更理想的效果。

3) lacquer spray gun: gun, guns, three shots,, according to different colors to select monochrome projector, dual color, multicolor with guns, gun, in order to adapt to the different construction technology, spewing more ideal effect.

4) 无气喷枪一套或毛刷等。

4) an airless spray gun or brush etc..

5) 下壶喷枪: 容量500mL ,口径113mm 以上。容量不能太大,否则操作不便;口径不能太小,否则施工速度慢,不宜大面积施工。

5) under the pot gun: capacity 500mL, diameter 113mm above. Capacity can not be too large, otherwise the operation is inconvenient; diameter can not be too small, otherwise the construction speed is slow, not large area construction.